|
Model
|
Cup
|
Rim
|
Bore
|
Description
|
| PT-20
|
31.0
mm Deep cup, strongly rounded at bottom. |
8.2
mm Inner and outer rim well rounded. Contact point toward the
perimeter. |
7.8
mm Backbore enhanced for large-bore F-Tubas. |
An
excellent mouthpiece for F and Eb tubas, particularly when a
full, dark, orchestral sound is desired. |
|
PT-24 |
31
mm Moderately deep, well rounded at bottom. |
10
mm Wide cushion rim. Well rounded inner and outer edge. |
9
mm |
An
excellent general purpose mouthpiece for F, Eb, CC and BBb tubas
featuring a comfortable rim and a large throat bore for dePT-h
of tone and volume. OPT-imized for solid sound with good projection
and accurate response in all registers. Available in both standard
and heavy shell PT--24+ versions! |
| PT-30 |
32
mm diameter. Medium dePT-h. |
Width
8 mm. Very round inner and outer edges. |
8.3
mm. |
Model
PT-30 has moderate dimensions. The sound is wellcentered yet
round and offers good tonal modulation. It has the darkness
necessary for use in large ensembles while maintaining clarity
for solo, quintet or highrange playing. For contrabass tubas. |
| PT-32 |
32.5
mm diameter. Mediumlarge. Funnelshaped. |
Width
8 mm. Rounded inner and outer edges. |
8.3
mm. |
Model
PT-32 is similar to Model PT--30 while slightly larger. It provides
substantial middle and low register volume with easy high range
accessibility. For contrabass tubas. |
| PT-34 |
32.5
mm diameter. Medium dePT-h, wellrounded bottom. |
Width
7.5 mm. Moderately wide rim with rounded inner edges. |
8.4
mm. |
Model
PT-34 balances very quick response in the low range with clear
sound and strong projection. Even moderately developed players
will find it easy to handle. |
|
PT-36 |
33
mm diameter. Deep and funnelshaped. |
Width
7.5 mm. Medium sharp inner edge, wellrounded outer edge |
8.3
mm. |
Model
PT-36 is ideal for large-bore instruments where fast response
is desired. The relatively narrow rim provides remarkable flexibility
and the cup has adequate dePT-h necessary for good tone. |
| PT-38 |
33
mm. diameter. Moderately deep, funnelshaped, moderately round
at bottom. |
Width
7.5 mm. Rounded inner and outer edges |
8.3
mm. |
Model
PT-38 is a further development of the highly successful Model
PT-36. The cup is slightly wider at the top third of its length;
the rounded rim is very comfortable, even for long playing sessions.
The mouthpiece has a similar sound to the Model PT-36 due to
a slightly tighter backbore. This model is recommended for players
with large lips who prefer a clear symphonic sound with great
power and projection |
| PT-42 |
34
mm diameter. Deep, pure funnel shape, moderately round at bottom. |
Width
7.5 mm. Rounded inner and outer edges. |
8.3
mm. |
Model
PT-42 provides a strong fundamental with a clear and colorful
sound. It has great strength and excellent projection. All the
virtues of the funnelcup philosophy incorporated into a large
mouthpiece, recommended for large contrabass tubas. |
| PT-44 |
33
mm diameter. Mediumlarge dePT-h, funnel shaped. |
Width
7.5 mm. Rounded inner and sharp outer edges. |
8.4
mm. |
Model
PT-44 provides a strong fundamental and colorful sound. It gives
good projection to larger instruments. The fine response and
flexibility makes this an excellent mouthpiece for the modern
CC tuba player. |
|
PT-48 |
33.5
mm diameter. Deep, funnelshaped cup, rounded at bottom. |
Width
8 mm. Rounded inner and outer edges. |
8.5
mm. |
Model
PT-48 is similar to the PT--44 yet larger. The sound is dark
with a pronounced core. Excellent for medium-large and large-bore
CC and BBb tubas. |
| PT-49 |
33.5
mm diameter. Deep, funnelshaped cup, well rounded at bottom. |
Width
8 mm. Rounded inner and outer edges. |
8.3
mm. |
Model
PT-49 has a larger cup than the PT-48, yet is not quite as large
as Model PT-50. Low register response is superb, combined with
a particularly full and powerful mid range. An excePT-ionally
good large mouthpiece! |
| PT-50 |
33
mm diameter. Deep, funnelshaped cup. |
Width
7.5 mm. Flatter rim with sharp inner edge. |
8.3
mm. |
Model
PT-50 is the largest funnelshaped style in the current line.
The sharp inner rim aids articulation and tonal clarity in this
wellaboveaverage cup volume. This model provides huge dynamic
range and fast response. It aids low register playing while
still providing a good upper range. It is recommended for advanced
players who prefer a truly large mouthpiece. Available in both
standard and heavy shell PT--50+ versions! A Perantucci Best-Seller! |
| PT-60 |
32
mm diameter. Shallow, rounded cup. |
Width
9 mm. Moderately round inner and wellrounded outer edges. |
7
mm. |
Model
PT-60 is a standardrim, shallow cup mouthpiece. The small throat
and tight backbore provides the brilliance required for solo,
chamber, or recording performance, but can also be used for
playing where a transparent sound is desired, particularly on
large tubas. This is a bright sounding Ftuba mouthpiece. |
|
PT-61 |
31.5mm.
Moderately deep
|
Width
8 mm. Rounded inner and outer edges. |
7,0mm
|
Model
PT-61 is oPT-imized for velocity, endurance and high-range solo
performance. The sound is essentially dark yet with a clear
core. Highly recommended for virtuoso playing. |
| PT-62 |
32
mm diameter. Small, rounded cup. |
Width
9 mm. Rounded inner, wellrounded outer edges. |
7
mm. |
Model
PT-62 is a cushionrim verson of model PT-60. It is wellsuited
to extended length solo performances or long recording sessions.
It is recommended for players with large lips, or for those
players who wish to reduce stress on the embouchure during heavy
sessions. |
| PT-64 |
32
mm diameter. Moderately shallow cup, bowlshaped. |
Width
9 mm. Very round cushion. |
7.8
mm. |
Model
PT-64 provides a lively and exciting sound with a clear core
and excellent projection. It is recommended especially for the
F and Eb tubas, giving great power and a commanding nature for
solo performances with large accompanying ensembles, or for
use in executing the highrange orchestral literature. This is
one of the most popular F-tuba mouthpieces ever offered. |
| PT-65
|
F-Tuba
Solo and Ensemble Mouthpiece
32mm Medium dePT-h, strongly round.
|
8.5mm
Rounded with well defined inner contact point. |
7.8mm |
Model
PT--65 is similar to the PT--64, on which it is based. The PT--65
provides a strong center and great accuracy in all ranges just
as the PT--64 does but with a different tonal nature.. The center
is clear and dominating yet dark in character. The response,
the accuracy, the flexibility, the tonal nature of this new
model accomodates modern large bore instruments and demanding
contemporary literature. A Perantucci Best-Seller! |
| PT-66 |
32.5 mm diameter. Medium dePT-h, bowlshaped. |
Width
8 mm. Rounded inner and outer edges. |
8
mm. |
Model
PT-66 is a traditional, Germanstyle mouthpiece giving a clear
and lively sound. It's deeper cup provides more volume with
a slightly mellower quality than models PT-64 or PT--65. It
is highly recommended for the F and Eb tubas, but is also useful
or for the CC and BBb tubas where quick response and a clear,
vibrant sound is desired. |
| PT-68 |
32.5
mm diameter. MediumdePT-h, very rounded at the bottom. |
Width
8 mm. Rounded inner and outer edges. |
8
mm. |
Model
PT-68 is a highdynamic range mouthpiece with an essentially
bright sound. It has a clear quality combined with a fullness
expected only from deeper mouthpieces. It gives great power
and a commanding nature to the Ftuba, especially for solo performances
with large accompanying ensembles. |
| PT-70 |
32.5
mm diameter. Deep, very round at bottom. |
Width
8 mm. Small with sharp inner rim. |
8
mm |
Model
PT-70 is a fairly deep mouthpiece with a bellshaped cup which
provides a broad sound with quick, even response. It is a comfortable
and powerful mouthpiece which features a brilliant sound and
is highly recommended for any tuba. |
| PT-72 |
32.5
mm diameter. Moderately rounded at bottom. |
Width
8 mm. Fairly sharp inner edge, moderately round rim. |
8.1
mm. |
Model
PT-72 is a large mouthpiece for the F or Eb tuba. The sound
has considerable weight combined with the richness and clarity
associated with the German concePT-. It is also recommended
for intermediate level students of the BBb and CC tubas. |
| PT-80 |
32.5
mm diameter. Deep, very round at bottom. |
Width
8.5 mm. Cushion rim, wellrounded inner and outer edges. |
8
mm. |
Model
PT-80 is designed players who prefer a wide cup when a clear
but yet moderately dark sound is desired. It has great projection
in all registers and is recommended for the F or Ebtuba. |
| PT-82 |
32.5
mm diameter. Moderately shallow. Very round cup. |
Width
8.0 mm. Rounded rim with slightly sharp inner edge. |
8.2
mm. |
Model
PT-82 is a highdynamic range, Germanstyle mouthpiece, especially
designed for large or otherwise mellow sounding instruments.
The low register response is particularly good. |
| PT-83 |
32
mm diameter. Medium deep funnel. |
Width
7.5 mm. Fairly sharp inner edge. Moderately round rim. |
8.6
mm. |
Model
PT-83 offers players who prefer a moderately wide cup a distinct
but dark sound in all registers. The sharp inner rim provides
quick response. It is designed for use with the CC and BBb tubas
and is available in both regular and heavy shell PT-83+ versions. |
| PT-84 |
32
mm diameter. Bowlshaped, deep cup. |
Width
8.0 mm. Wellrounded inner and outer edges. |
8 mm. |
Model
PT-84 provides a clear sound. It is very flexible, has a good
upper range, and gives a very quick response for a mouthpiece
of this size, particularly in the low range. This is a very
popular mouthpiece, recommended for Eb and BBb tubas. |
| PT-86 |
33.7
mm diameter. Very wide diameter with moderate dePT-h. |
Width
7.5 mm. Slightly rounded inner edges. |
8.3
mm. |
Model
PT-86 offers a very wide cup for players with particularly large
lips. It favors middle and low registers, particularly when
high volume is desired. The tonal character is round and weighty. |
| PT-88 |
33.5mm
Wide, deep cup. |
7.0
mm Flat, well-defined inner edge. |
8.1
mm |
The
PT--88 along with the PT--50 constitute the most preferred and
widely used large contrabass tuba mouthpieces in the Perantucci
line. The cup is wider yet not as deep as that of the PT--50.
The sound has great strength and dePT-h. This is now available
in a heavy shell design, the PT--88+ which incorporates modified
cup and bore specifications as well as additional shell weight
for unprecedented stability and projection of the sound. A Perantucci
Best-Seller! |
